Zundapp Z810 Trekking E-Bike 28 Inch, electric trekking bicycle

Zundapp Z810 Trekking E-Bike 28 Inch - Fully Equipped City And Touring Ride

Published on 09/09/2026 at 18:27 | Editorial responsibility: Rafael Müller, Editor-in-Chief AD HOC NEWS

Zundapp Z810 Trekking E-Bike 28 Inch combines an aluminum frame, 250 W rear hub motor and a 550 Wh frame battery for assisted rides up to 25 km/h. For taller riders, the 52 cm frame and 175-195 cm height recommendation define its comfort zone.

Fotorealistische Studioansicht von Trekkingrad in neutraler Produktdarstellung
Fotorealistische Studioaufnahme von Trekkingrad zum Thema Zündapp Blue 7.0 Damen, klare Lichtfuehrung, Illustration mit AI erstellt.

Zundapp Z810 Trekking E-Bike 28 Inch positions itself as a fully equipped electric trekking bicycle for riders who want one bike for city commuting and relaxed touring. With its 700c/28-inch wheels, aluminum frame and rear hub motor, it targets riders between 175 and 195 cm body height who need everyday practicality and moderate electric assistance. The 550 Wh frame battery, 250 W rear motor and up to 25 km/h pedal assist make it suitable for mixed-use rides on paved roads and light paths.

Frame, Geometry And Rider Fit

The Zundapp Z810 uses an aluminum diamond frame with a listed frame size of 52 cm, paired with 700c/28-inch wheels for a familiar trekking bike geometry.Technical data for the Z810 specify an entry height of 82 cm, a handlebar height from the ground between 107 and 112 cm and a saddle height from the ground between 95 and 109 cm. This geometry is optimized for an advised rider height range of 175-195 cm, giving taller riders a more upright trekking position with moderate reach. The listed permissible total weight is 120 kg, which needs to cover bike, rider and cargo, making it suitable for typical commuting loads within this limit.

The bike rolls on 700c / 28-inch wheels, which are standard for trekking bicycles and support stable straight-line behavior and predictable cornering on paved surfaces.Wheel size and geometry details mention a recommended body height range that confirms the fit target. With a complete bike weight of 28.2 kg and a permitted total system weight of 120 kg, riders need to factor in luggage and accessories to stay within the specification for safe operation.

Motor, Battery And Assistance

At the core of the Z810 is an Ananda M145CD rear hub motor with a nominal power rating of 250 W and operating voltage of 36 V, providing pedal assistance up to a maximum speed of 25 km/h.Motor and assistance specifications indicate a maximum torque of 50 Nm, which is typical for trekking-class pedelecs and designed to support moderate hills and everyday acceleration rather than aggressive off-road riding. Assistance levels are controlled through an Ananda D16 LCD 2.4-inch TFT display with Bluetooth support and integration with the Ananda Ride app, offering five assistance levels plus a walk-assist function.

The bike uses a Greenway frame battery with a capacity of 14.91 Ah and 550 Wh at 36 V.Battery and range information list a range between 15 and 130 km depending on load and riding style, reflecting how rider weight, cargo, assistance level and terrain significantly affect usable distance. Charging time is specified between 5 and 6 hours depending on the charger, aligning with typical home charging overnight usage. For riders planning longer touring days, using moderate support levels and efficient cadence will be important to stay closer to the upper band of the range.

Drivetrain, Brakes And Contact Points

The Z810 is configured as an electric trekking bike with an 8-speed drivetrain centered on a Shimano Altus rear derailleur.Drivetrain and brake details mention Shimano MT200 aluminum brake levers and hydraulic braking components, with V-brakes and full trekking equipment such as chain guard and kickstand. The combination of an 8-speed gear range and 50 Nm rear hub motor torque aims to support city gradients and rolling countryside while prioritizing simplicity over the extended gear ranges found on sport-oriented touring bikes.

Contact points are configured for comfort on longer rides. The bike uses a Zundapp aluminum trekking handlebar with a listed width of 640 mm, paired with Hermanns Ergo DD37B grips shaped to distribute hand pressure with an ergonomic profile.Handlebar and grip specifications emphasize an adjustable Zoom aluminum stem with a length of 95 mm and angle range of -10° to +50°, giving riders flexibility to select a more upright or slightly sportier posture. A Zoom suspension seatpost with 27.2 mm diameter and 350 mm length contributes additional vertical compliance, absorbing small road imperfections and complementing the front suspension fork.

Suspension, Tires And Everyday Equipment

Front suspension is provided by a Zoom AMS MLO suspension fork with 63 mm of travel, lockout and adjustable preload.Fork and suspension data frame this component as a moderate-travel solution suitable for smoothing urban potholes, cobblestones and light gravel sections rather than aggressive mountain biking. Riders can adjust the preload to better match their weight and preferred level of firmness, while the lockout provides efficiency benefits on smooth roads where suspension movement would otherwise absorb pedaling energy.

Tires are Kenda Khan II 700c x 40c with a listed width of approximately 1.75 inches and reflex stripes on the sidewalls.Tires and lighting specification describe a street-oriented tread pattern designed for paved and compacted surfaces. The reflex stripes contribute to side visibility under vehicle headlights, an important factor for urban riding in low light. Lighting is supplied by a Büchel Shiny 50 front light and a matching Büchel rear light, both connected to the bike’s electrical system and compliant with German StVZO road regulations, which require permanently mounted, reliable lighting on bicycles used on public roads.

Everyday equipment on the Z810 includes 80 mm plastic fenders with a listed width of 46 mm to shield against spray, a Herrmans Slyde partial chain guard, a center-mounted kickstand and a rear luggage rack.Equipment overview and components show the bike configured as a “full equipment” trekking model, which is intended to be usable for commuting and light touring without major upgrades. The rear rack supports typical pannier and trunk bag setups, and together with the 120 kg total weight allowance, it defines the realistic cargo capacity for daily rides.

Weight, Assembly And Practical Handling

With a listed weight of 28.2 kg, the Zundapp Z810 sits on the heavier side for trekking e-bikes with a 550 Wh battery and full equipment, but within a realistic band for bikes that combine fenders, rack, lights, suspension fork and an aluminum frame.Weight and system limit details put the permissible total weight at 120 kg, leaving room for a mid-weight rider and moderate luggage but less margin for very heavy riders with full touring loads. This weight will be noticeable when maneuvering the bike in tight spaces, carrying it up stairs or riding unassisted without electric support, particularly on climbs.

The manufacturer specifies that the Z810 arrives approximately 98% pre-assembled.Pre-assembly information emphasizes that remaining tasks typically include adjusting the handlebar, mounting pedals and checking key bolts and safety-relevant parts. For riders without bicycle maintenance experience, a professional check after delivery helps ensure that hydraulic brakes, drivetrain and electrical connections operate within specification from the first ride. The combination of pre-assembly and full equipment reduces the need for aftermarket additions such as fenders or lights.

Comparison With Zundapp Z802 Trekking E-Bike

A closely related alternative is the Zundapp Z802 trekking e-bike, which uses 28-inch wheels, a 48 cm frame and a 536 Wh rear rack battery.Z802 trekking e-bike specifications list a range between 30 and 115 km, a 21-speed drivetrain, Kenda Khan II 700c x 40c tires and a listed weight around 24.8 kg. Compared with the Z810’s 28.2 kg weight and 550 Wh frame battery, the Z802 trades a slightly smaller nominal battery capacity for lower total bike weight and a different battery placement on the rear rack rather than in the frame.

The Z802 uses an aluminum frame with a 48 cm height instead of the Z810’s 52 cm frame size, making it more appropriate for somewhat shorter riders than the 175-195 cm range targeted by the Z810.Z802 frame and range data confirm 28-inch wheels, a maximum supported system weight of about 120 kg and similar everyday equipment including fenders, rack and powered lighting. Riders choosing between the two models effectively weigh the Z810’s slightly larger frame and integrated frame battery against the Z802’s lower weight and rack battery configuration, in addition to differences in drivetrain specification and hydraulic versus mechanical braking setups.

Positioning, Use Cases And Limits

Within the e-bike market, the Zundapp Z810 Trekking E-Bike 28 Inch positions itself as a fully equipped electric trekking bike for taller riders who expect complete city and touring features out of the box: suspension fork with 63 mm travel, full fenders, luggage rack, chain guard, powered front and rear lights, 250 W rear hub motor and a 550 Wh frame battery.Trekking equipment and positioning highlight its recommended 175-195 cm rider height and 120 kg system weight limit, placing it as a better fit for taller commuters and leisure riders whose combined rider and cargo mass stays within this band.

The limits of the Z810 are shaped by its weight, torque level and system weight allowance. At 28.2 kg and 50 Nm maximum motor torque, its support is aimed at moderate urban gradients and light touring rather than steep, prolonged climbs with heavy luggage.Torque and weight constraints make it a practical choice for riders who prioritize equipment completeness and comfort within its defined range of use rather than minimal weight or high performance. Compared with the Z802, the Z810’s larger frame and integrated battery appeal more to taller riders looking for a frame battery design and hydraulic braking, while riders who prioritize lower bike weight might look more closely at alternatives like the Z802 or other mid-drive trekking e-bikes in similar price segments.

Direct from the Manufacturer

Full Specs For The Zundapp Z810 Trekking E-Bike

Zundapp details the Z810's frame, motor, battery and complete trekking equipment on its technical data page.

Key Facts At A Glance

  • Product: Zundapp Z810 Trekking E-Bike 28 Inch, 52 cm frame
  • Manufacturer: Zundapp
  • Category: Electric trekking bicycle
  • Motor: Ananda M145CD rear hub motor, 250 W, 36 V, max. 50 Nm
  • Battery: Greenway frame battery, 14.91 Ah, 550 Wh, 36 V
  • Range: 15-130 km depending on load and riding style
  • Weight: 28.2 kg bike weight, 120 kg permissible total weight
  • Target audience: Taller riders between 175-195 cm seeking a fully equipped city and touring e-bike

Explore Zundapp Z810 Trekking E-Bike Content

Disclaimer...

en | wirtschaft | 70076902 |