Viessmann Vitodens 200-W 11 kW Smart Heating Control - Wall-Mounted Gas Condensing Boiler With Wi-Fi

Viessmann Vitodens 200-W 11 kW Smart Heating Control combines a wall-mounted gas condensing boiler, a 7-inch touch display and integrated Wi-Fi for app-based control. For homeowners with hydronic heating, the smart ViCare app connectivity matters most.

Viessmann Vitodens 200-W 11 kW with smart heating control is a wall-mounted gas condensing boiler that blends compact hardware, a 7-inch touch display and integrated Wi-Fi to give hydronic heating systems a connected backbone for modern homes. It targets one-family house owners who want direct boiler control on the unit and remote access through the ViCare app on smartphone or tablet for scheduling, room-by-room management and status monitoring.Vitodens 200-W 11 kW profile

Smart Heating Control And Connectivity

The 11 kW Vitodens 200-W configuration uses a 7-inch grayscale touch display directly on the boiler as the primary interface for setting heating times, target temperatures and operating modes such as normal and reduced operation. This front display lets installers and owners adjust key parameters without separate controllers, while still keeping the device wall-mounted and compact in the utility room or basement.7-inch touch display control

A built-in Wi-Fi interface is central to the smart heating control concept. Connectivity Inside allows the Vitodens 200-W 11 kW to connect directly to the internet and pair with Viessmann's ViCare app, enabling remote boiler operation, management of heating schedules and access to system status and fault messages from a phone or tablet. In documented setups, single-room control is possible through ViCare Smart Climate accessories, covering up to 20 rooms with individual heating programs managed in the app.Integrated Wi-Fi and ViCare Smart Climate

Gas Condensing Boiler Technology And Output Band

Vitodens 200-W is a gas-fired wall-mounted condensing boiler series using a modulating cylinder burner and stainless steel heat exchanger, designed for operation on natural gas or liquid propane. Technical data manuals for Vitodens 200-W models show heating inputs from 8.5 to 199 MBH (2.5 to 58.3 kW) for certain B2HE system boiler types, reflecting a broad modulation range suitable for low-load modern houses and higher demand multi-family buildings.Vitodens 200-W B2HE technical data

Residential Vitodens 200-W boilers in the B2HE generation are offered with rated heat outputs such as 11.0 kW at 50/30 °C water temperature conditions and 10.1 kW at 80/60 °C, positioning the 11 kW unit in the lower output band for detached houses and 4-plus bedroom homes with well-insulated envelopes. Dimensions for these wall-mounted models are around 360 mm depth, 450 mm width and 700 mm height, with dry weights in the low-30 kg range, keeping the boiler footprint relatively compact compared with older floor-standing units.Residential outputs and dimensions

US Presence And Manufacturer Identity

Vitodens 200-W as a series is distributed in North America by Viessmann Manufacturing Company (U.S.) Inc., based at 45 Access Road, Warwick, Rhode Island, 02886. Technical documentation for Vitodens 200-W B2HA and B2HE models lists this US entity in contact details and support information, confirming Viessmann Manufacturing Company (U.S.) Inc. as the responsible manufacturer for US-installed units and associated technical support lines.US manufacturer contact details

The smart heating control features described for Vitodens 200-W 11 kW, including the 7-inch touch display and Wi-Fi-based ViCare app connectivity, are aligned with the capabilities highlighted on international Vitodens 200-W product pages that emphasize integrated Wi-Fi interfaces, app-based operation of heating circuits and domestic hot water scheduling. This ties the 11 kW configuration into the broader Vitodens 200-W platform, which is positioned as a digitally manageable gas condensing boiler line for efficient heating upgrades in family homes.Vitodens 200-W overview

Comparison With Larger Vitodens 200-W Models

Within the Vitodens 200-W range, larger B2HA gas-fired wall-mounted condensing boilers are offered with rated inputs such as 71 to 285 MBH, 71 to 311 MBH and up to 530 MBH, supporting multi-boiler installations reaching 4,240 MBH for commercial applications. These higher-output units weigh around 194 lb for sizes 285 to 352 MBH and about 298 lb for 399 and 530 MBH, far above the low-30 kg dry weight of the 11 kW residential boiler, highlighting the compactness of the smaller model for single-family houses.Higher-output Vitodens 200-W inputs and weight

Residential B2HE versions with outputs up to 35 kW focus on detached houses and 4-plus bedroom homes. Compared with those 35 kW models, the 11 kW smart heating configuration suits well-insulated smaller homes and low-load systems, while still offering the same integrated Wi-Fi, ViCare app support and touch display interface. Owners choosing between 11 kW and higher-output Vitodens 200-W models balance heat demand and domestic hot water requirements against physical space and installation complexity, with the smaller unit preserving wall space and simplifying installation in tight boiler rooms.Vitodens 200-W range positioning

Placement And Use Case

Vitodens 200-W 11 kW with smart heating control is positioned as a gas condensing wall-mounted boiler for owners who want both on-device configuration and digital connectivity for hydronic heating. Its 7-inch display and Wi-Fi interface, coupled with ViCare app integration and potential single-room control for up to 20 rooms, make it a candidate for smart home heating setups where schedules and room temperatures are managed centrally from a mobile device while the boiler delivers efficient low-temperature heating through radiators or underfloor circuits.Smart heating use case

Vitodens 200-W 11 kW Key Facts

• Product: Viessmann Vitodens 200-W 11 kW with 7-inch touch display and smart heating control
• Manufacturer: Viessmann Manufacturing Company (U.S.) Inc., Warwick, RI
• Category: Gas condensing wall-mounted boiler with smart control
• Rated heat output: 11.0 kW at 50/30 °C water temperature
• Operating fuel: Natural gas or liquid propane gas
• Connectivity: Integrated Wi-Fi interface with ViCare app support and single-room control for up to 20 rooms
• Target audience: Owners of detached houses seeking digitally managed hydronic heating