Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz - Large Offset Shade for Patio Seating

Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz uses a square 3x3m canopy on an aluminum offset frame to shade larger outdoor seating areas than classic center-pole umbrellas. For patios and decks with four to six chairs, the side mast and broad fabric span are the defining features.

Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz is a freestanding offset patio umbrella with a square 3x3m canopy designed to cast shade over a larger outdoor seating area than classic center-pole models. The side-mounted mast keeps the space under the canopy mostly clear, which helps when arranging a full table with several chairs or lounge furniture without a central pole in the way.

Design And Canopy Size

The defining element of Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz is its quadrilateral canopy measuring 3x3m, giving a nominal covered footprint of around nine square meters of shade. In practice that footprint aligns with the seating area needed for an outdoor table and four to six chairs or a set of loungers clustered together, and separates the shaded zone from the location of the base and mast.

Within Sunfun's offset umbrella line, a 3x3m canopy sits alongside round 3m and rectangular 300 x 350 cm models such as the Sunfun Capri, which uses a 300 x 350 cm olefin canopy with UV protection 50 and a net weight of 39.4 kg on an aluminum mast and steel struts as documented on the Austrian home improvement site Bauhaus. That gives a sense of the physical scale and shade reach that Sunfun aims for in this canopy size class.

Frame Material And Construction

The frame of Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz is described as aluminum, following the pattern of other Sunfun offset umbrellas that use a powder-coated aluminum mast combined with steel support struts to balance strength and handling. In the Sunfun Ampelschirm Toscana series the mast diameter is specified at 56 mm and the canopy fabric is polyester 180 g/m² with a UV protection factor of 40, while the net weight is listed at 13.006 kg for a 300 cm round canopy according to the technical table on Bauhaus. Those figures illustrate how an aluminum frame can keep overall mass manageable even with a broad shade surface.

For Capri models with 300 x 350 cm rectangular canopies the same retailer lists a net weight of 39.4 kg combined with a powder-coated aluminum mast and steel struts, alongside olefin fabric at 250 g/m² and UV protection 50. That heavier figure reflects additional structural elements for the larger span, but the underlying material choice remains aluminum for the mast to limit corrosion and enable rotation and tilting using a foot pedal and grip along the mast, features that are common in Sunfun's offset umbrella catalogue.

Canopy Fabric And UV Protection

Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz is positioned within a segment where canopy fabrics typically use polyester or olefin in the 180 to 250 g/m² range and specify UV protection factors between 40 and 50. The Sunfun Ampelschirm Toscana, for example, uses 100% polyester at 180 g/m² with UV protection 40+ and a hand-washable, lightly water-repellent finish, while the Capri round offset umbrella uses a 200 g/m² olefin canopy with UV protection 50 and high lightfastness as documented by Bauhaus. Those specifications show the level of sun protection and fabric weight Sunfun adopts for comparable shade products.

Against that backdrop the 3x3m aluminum offset shade concept aims for a similar protective profile, with a canopy weight class that balances light handling and resistance to fading and moisture. In everyday patio use, UV protection 40 to 50 gives a measurable reduction of direct sunlight through the fabric while still allowing ambient daylight underneath, which is why Sunfun emphasizes UV protection ratings in its Capri and Toscana product lines sold through European home improvement channels.

Positioning, Alternatives, And Use Cases

Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz sits between round 300 cm offset umbrellas such as the Toscana and larger rectangular 300 x 350 cm models like Capri when it comes to shaded footprint and mass. A round 300 cm Toscana with aluminum mast and polyester 180 g/m² canopy carries a net weight of 13.006 kg, while the rectangular 300 x 350 cm Capri with powder-coated aluminum mast, steel struts, and 250 g/m² olefin fabric reaches 39.4 kg, each figure listed in the technical tables of Bauhaus and Bauhaus. For shoppers weighing options, this gives a concrete sense of how canopy span and support structure change handling weight.

In practical terms, the 3x3m aluminum offset umbrella appeals to users who want more directed shade than a classic 270 to 300 cm center-pole patio umbrella without stepping up to the largest and heaviest rectangular offset frames. Residential patios, decks, and poolside seating areas are the core target settings, especially where a table and several chairs or chaise lounges need a concentrated shade patch that tracks the furniture rather than the base location. Compared with a standard 300 cm round offset shade, the square layout of the 3x3m canopy makes it easier to align coverage with rectangular dining sets or modular lounge arrangements while keeping the mast and base off to the side.

Key Facts At A Glance

• Product: Sunfun Ampelschirm 3x3m Aluminium Sonnenschutz
• Manufacturer: Sunfun
• Category: Offset patio umbrella
• Canopy size: 3x3m square shade footprint, around 9 m² covered area
• Frame material: Aluminum mast with support structure in the offset umbrella class
• Comparable canopy fabric: Polyester or olefin 180-250 g/m² with UV protection factors 40-50 based on Sunfun Toscana and Capri data
• Target audience: Residential users needing offset shade for outdoor tables and lounge seating