Spinera SUP3 High Pressure 12V SUP Pump - 20 PSI and 350 L/ min
Published on 09/22/2026 at 09:54 | Editorial responsibility: Rafael Müller, Editor-in-Chief AD HOC NEWS
Spinera SUP3 High Pressure 12V SUP Pump, 20 PSI brings a compact electric inflator to SUP boards, kayaks, tents, and small boats. Its two-stage system starts with a high-volume blower, then switches to a compressor for final pressure.
Two Stages, 20 PSI Maximum
The pump reaches a maximum pressure of 20 PSI. Stage one delivers 350 L/min through the blower, while stage two delivers 70 L/min through the compressor.
Spinera specifies approximately 10 minutes to reach 10 PSI, 15 minutes to reach 15 PSI, and 20 minutes to reach 20 PSI on an 11-foot SUP with 15 cm dropstitch construction. The timing describes a specific board setup, not a universal result for every inflatable.
12V Power And Included Parts
The SUP3 uses DC 12V power and comes with a 3-meter 12V cable, a 100-centimeter air hose, and five valve adapters. The digital LCD and touch buttons allow pressure selection before inflation, and automatic shutoff stops the pump after the preset pressure is reached.
The housing measures 23 x 14 x 12 cm and weighs 1.9 kg. ABS and PA form the listed materials, while an integrated deflation function reverses the airflow for removing air from compatible inflatables.
How It Compares With Hand Pumps
A manual double-action pump avoids a 12V power connection, but it requires continuous physical pumping. The SUP3 instead combines 350 L/min of initial airflow with a 70 L/min compressor stage and automatic shutoff.
The electric design suits paddlers who transport equipment near a vehicle with a 12V outlet. Its limits are equally concrete: the pump needs a suitable DC power source, and its 1.9 kg body is heavier than a basic hand pump.
Best Fit For SUP Setup
For inflatable SUP and kayak users, the Spinera SUP3 is a 20 PSI dual-stage pump with a defined accessory set and automatic pressure control. It is a practical fit for vehicle-based launches and repeated inflation tasks, while a hand pump remains simpler when no 12V outlet is available.
Spinera SUP3 Product Details
- Product: Spinera SUP3 High Pressure 12V SUP Pump, 20 PSI, Art. No. 19400
- Manufacturer: Point of Sports GmbH
- Category: Electric SUP and kayak pump
- Maximum pressure: 20 PSI
- Stage one airflow: 350 L/min
- Stage two airflow: 70 L/min
- Power: DC 12V
- Dimensions: 23 x 14 x 12 cm
- Weight: 1.9 kg
- Cable length: 3 m
- Air hose length: 100 cm
- Valve adapters: 5 included
- Target audience: SUP and kayak users
