Makita DHP484Z 18V LXT Hammer Driver Drill - Compact Brushless Power With 54 Nm Torque

Makita DHP484Z 18V LXT Hammer Driver Drill delivers up to 54 Nm of hard torque and runs on Makita's 18V LXT lithium-ion battery platform. For demanding drilling and fastening tasks in wood, metal and masonry, its compact brushless design and 2-speed gearbox matter most.

Makita DHP484Z 18V LXT Hammer Driver Drill is a cordless hammer drill driver built for demanding drilling and fastening work in wood, metal and masonry while staying compact enough for everyday jobsite use. With a brushless motor delivering up to 54 Nm of hard torque and a 2-speed all-metal gearbox, it sits in Makita's 18V LXT lithium-ion system and is sold in the body-only configuration without battery or charger, so existing LXT packs can drop straight in.Makita lists DHP484 as an 18V LXT hammer drill driver with 54 Nm torque and 0-2000 min-1 top speed.

Key Specs And 18V LXT Platform

At its core, the Makita DHP484Z runs on an 18 V nominal battery voltage in the LXT lithium-ion series, using slide-on packs across capacities from roughly 3.0 Ah up to 6.0 Ah and above, which lets users match run time and weight to the job.A product profile notes that DHP484Z is part of the Makita 18V LXT range and works with packs such as BL1830B, BL1840B and BL1850B. The brushless motor drives a 2-speed planetary gearbox with a no-load speed of 0-500 rpm in first gear and 0-2000 rpm in second gear, giving controlled screwdriving in low gear and faster drilling when high speed is selected.A technical data sheet for DHP484Z states a no-load speed of 0-500/0-2000 min-1 with 54 Nm hard and 30 Nm soft torque. The hammer mechanism is switchable and on the high setting reaches up to 30,000 blows per minute for drilling into materials like brick and block.An aggregated spec listing cites a blow rate up to 0-30,000 min-1 in hammer mode.

Drilling capacities line up with typical 18V hammer driver drills. DHP484Z is specified for up to 38 mm drilling in wood, 13 mm in steel and 13 mm in masonry, covered by a 1.5-13 mm keyless chuck that takes common wood, metal and masonry bits.A UK retail spec sheet lists maximum drilling capacities of 38 mm in wood and 13 mm in both steel and masonry, with a 1.5-13 mm chuck. Torque adjustment covers 21 clutch settings plus a direct drill mode, allowing the user to dial back for delicate fasteners or run full power for structural screws.Makita's catalog shows the DHP484 line as an 18V hammer drill with 54 Nm torque and 21 torque settings plus drill mode.

Design, Dimensions And Jobsite Features

Makita builds the DHP484Z around a compact, jobsite-friendly body with an all-metal 2-speed gearbox, rubber overmold on the grip and integrated LED work light. A European retailer gives overall dimensions of about 182 x 79 x 261 mm for length, width and height, with a weight around 1.9 kg including an 18V pack.One listing for DHP484Z cites dimensions of 182 x 79 x 261 mm and a weight of 1.9 kg with battery. Another spec sheet mentions a similar footprint at 182 x 79 x 244 mm without battery, keeping the tool relatively short from chuck to back and narrow through the body for access in tighter spaces.A detailed description of DHP484Z lists 182 x 79 x 244 mm as the tool dimensions without battery and notes a weight up to 1.8 kg. The LED work light sits near the chuck and includes a short afterglow to keep the work area illuminated for a moment after the trigger is released, which helps when aligning fasteners on framing or in cabinets.A retail spec sheet highlights the LED work light with afterglow and the 2-speed all-metal gearbox.

The tool is sold as a bare unit without battery, charger or case, which suits users already invested in Makita's 18V LXT platform. Some bundles pair DHP484Z with a Makpac stackable case insert, but the core Solo configuration keeps the package lean for fleet purchases and for tradespeople with existing storage solutions.A Makita bundle pairs DHP484Z with a Makpac inlay, while explicitly stating that batteries are not included. As part of the LXT family, the drill benefits from Makita's battery and tool communication system, which can include electronic protection circuits that guard against over-discharge and overheating in compatible packs.

Noise, Hammer Action And Everyday Performance

Hammer driver drills generate noticeable noise, and the DHP484Z is no exception. A technical data sheet lists a sound power level around 99 dB(A) when the hammer mechanism is engaged at higher speeds, which is in line with other 18V class hammer driver drills.The same data sheet cites a sound power level LWA of 99 dB(A). The impact mechanism delivers 0-7500 blows per minute in low gear and up to 0-30,000 blows per minute in high gear, letting users choose between more controlled impact for smaller anchors and faster hammering for larger holes in masonry.A spec overview lists blow rates of 0-7500/0-30000 min-1 for low and high gears.

On the torque side, 54 Nm in hard applications positions DHP484Z to handle structural screws and longer fasteners in wood framing, while the 30 Nm soft torque figure covers more moderate screwdriving tasks without overdriving when the clutch is used properly.One spec listing notes soft/hard torque figures of 30/54 Nm with 21 torque stages. The 21-position clutch and drill setting provide fine-grained control for driving screws into different materials, from chipboard and drywall to hardwood and metal studs.

Makita Brand, Ownership And US Sales Entity

Makita as a brand traces back to Makita Corporation, a Japanese power tool manufacturer founded in 1915 and headquartered in Anjo, Japan, which has grown into a global supplier of professional-grade cordless and corded tools.An overview of Makita Corporation describes it as a Japanese manufacturer of power tools founded in 1915 in Anjo. For the US market, Makita U.S.A., Inc. is the primary sales and distribution entity, with its home office located at 14930 Northam Street, La Mirada, California, and additional distribution and training facilities across the country.Makita U.S.A., Inc. states that its home office is in La Mirada, CA, with an extensive distribution network in the United States. Corporate directories list Makita U.S.A., Inc. at the same La Mirada address, along with regional offices and service centers in major US cities.A Makita corporate directory names Makita U.S.A., Inc. at 14930 Northam Street, La Mirada, CA, as the US corporate office.

Makita remains independently operated as a tool brand rather than being part of a larger conglomerate of consumer brands, which contrasts with many competitors that sit under holding companies owning multiple tool labels.An analysis of tool brand ownership notes that Makita is an independent Japanese brand based in Anjo rather than a subsidiary of another tool conglomerate. In North America, Makita positions the 18V LXT line, including DHP484Z-equivalent hammer driver drills, toward professional tradespeople and serious DIY users who need durable cordless tools and who often already own multiple Makita batteries and chargers.

Pricing And Position Against Alternatives

While Makita does not publish a fixed US list price for the DHP484Z hammer driver drill body, European retail listings provide a sense of how the tool is positioned. A German retailer lists the DHP484Z body at EUR 149.00, with specifications noting 18 V voltage, 0-500/0-2000 rpm speeds and 30/54 Nm soft/hard torque.A Eurozone listing prices the DHP484Z body at EUR 149.00 with the 18 V, 0-500/0-2000 rpm and 30/54 Nm spec. A large DIY chain shows a reduced price of around EUR 134.87 from a higher UVP for the Solo tool without battery or charger.Another retailer lists DHP484Z Solo at EUR 134.87 versus a UVP of EUR 189.21. In the US, an equivalent 18V LXT hammer driver drill with similar torque and speed typically lands in the mid-range segment of professional cordless tools, priced above entry-level homeowner drills but below heavy-duty SDS rotary hammers.

Within Makita's own lineup, DHP484Z sits above lighter-duty 18V hammer driver drills that deliver less torque and below newer models like the DHP485 that adjust ergonomics and sometimes add enhanced electronics. A Makita product listing for DHP485, for instance, also describes an 18V hammer drill format in the same LXT family, giving an indication of how Makita iterates on this platform with updated designs.A Makita product page for DHP485 shows another 18V LXT hammer drill in the same family, illustrating the evolution of the line. For users comparing across brands, DHP484Z's 54 Nm hard torque, 2-speed 0-500/0-2000 rpm gearbox and 13 mm masonry capacity place it squarely in the mainstream professional class competing with similar 18V hammer driver drills from rival manufacturers.

Use Cases, Limits And Who It Suits

In practical terms, Makita DHP484Z 18V LXT Hammer Driver Drill suits tradespeople such as carpenters, electricians and remodelers who need a single cordless tool that can drive screws, drill into wood and metal, and tackle moderate hammer drilling tasks into brick or block without stepping up to a dedicated rotary hammer. Its torque and 2-speed gearbox are sufficient for framing screws, lag bolts within reason, and hole drilling up to the quoted 38 mm in wood and 13 mm in steel and masonry when paired with appropriate bits.A technical description emphasizes use for screwdriving, drilling and hammer drilling with adjustable torque and 2-speed gearbox. For heavier continuous hammer drilling into reinforced concrete or larger diameter holes, users would typically move to an SDS-plus rotary hammer, which is built specifically for that level of impact and offers higher blow energy.

DIY users with a growing Makita 18V LXT kit benefit from DHP484Z's body-only offering and compatibility with a wide range of existing batteries, while professional users appreciate the brushless motor's efficiency and the all-metal gearbox for durability. The main limitations come down to its hammer drill nature: noise around 99 dB(A) calls for hearing protection, and the compact size still may struggle with the most demanding concrete work compared with heavier rotary hammers.The DHP484Z data sheet underscores both the 99 dB(A) sound power level and the 0-30,000 min-1 hammer rate. Overall, DHP484Z offers a balanced mix of compact design, brushless motor efficiency and professional-grade torque, making it a solid choice for users who want one 18V hammer driver drill to cover most of their day-to-day tasks across wood, metal and light masonry.

Makita DHP484Z Hammer Driver Drill Facts

• Product: Makita DHP484Z 18V LXT Hammer Driver Drill (body only)
• Manufacturer: Makita U.S.A., Inc., La Mirada, CA, USA
• Category: Cordless hammer driver drill (18V LXT)
• Model designation: DHP484Z (18 V nominal battery voltage)
• Speed range: 0-500/0-2000 rpm no-load, 2-speed gearbox
• Torque: 30 Nm soft, 54 Nm hard, 21 clutch settings plus drill mode
• Drilling capacity: 38 mm in wood, 13 mm in steel, 13 mm in masonry
• Weight and dimensions: Approx. 1.8-1.9 kg with battery, about 182 x 79 x 244-261 mm
• Target audience: Professional tradespeople and serious DIY users needing a compact 18V hammer driver drill compatible with Makita 18V LXT batteries.