Makita DHP484Z 18V LXT Brushless Hammer Drill - Compact 18V Power for Tough Jobs

Makita DHP484Z 18V LXT Brushless Hammer Drill delivers up to 54 Nm of tightening torque with a compact 182 mm body and 2,000 rpm top speed. For trade users and serious DIYers, the 18V LXT platform compatibility and 21 torque settings matter most.

Makita DHP484Z 18V LXT Brushless Hammer Drill is a cordless hammer driver drill built around Makita's 18V LXT lithium-ion platform and designed for drilling and fastening in wood, metal, masonry and concrete with a compact form factor and brushless motor efficiency.

Brushless 18V LXT Performance in a Compact Body

The DHP484Z uses Makita's 18V LXT lithium-ion battery system, giving access to a wide range of compatible packs from compact 2.0 Ah cells to higher-capacity 5.0 Ah and 6.0 Ah batteries for longer runtime without changing tools.18V LXT platform and bare-tool description The hammer driver drill form factor combines drilling, screwdriving and hammer action in one tool, with an aluminium gear housing and all-metal gear construction aimed at durability under trade use.Aluminium gear housing and all-metal gearing

The brushless DC motor in the DHP484Z is engineered to eliminate carbon brushes, reduce friction and heat and use battery energy more efficiently, with Makita describing up to 50% greater efficiency versus comparable brushed models on its combi drill line.Brushless motor efficiency claim A mechanical 2-speed gearbox provides low-speed, high-torque operation and a high-speed mode for lighter drilling tasks, while variable speed control by trigger allows the user to dial in the desired speed within each range.Mechanical 2-speed gearing and variable speed

Key Specifications and Capacities

Makita's technical data sheet lists a nominal battery voltage of 18 V and no-load speed ranges of 0-500 rpm in low gear and 0-2,000 rpm in high gear for the DHP484Z.18 V nominal voltage and speed ranges Maximum tightening torque is stated at 54 Nm in hard joint applications and 30 Nm in soft joint applications, with 21 torque settings plus a dedicated drill mode available at the collar.Torque figures and torque setting count Impact rate reaches 0-7,500 impacts per minute in low gear and 0-30,000 impacts per minute in high gear when hammer mode is engaged, supporting drilling into masonry and concrete.Impact rate and hammer drilling capability

The DHP484Z is specified with maximum drilling capacities of 38 mm in wood, 13 mm in steel, 13 mm in masonry and 13 mm in concrete when used with suitable bits.Maximum drilling diameter figures Overall length is listed at approximately 182 mm, giving a compact body that helps access tight spaces and overhead locations compared with bulkier hammer drills.Overall length specification Skin weight is around 1.2 kg without battery, while weight with a typical 18 V LXT pack is framed at about 1.8 kg.Weight without and with battery

The drill uses a 1/2"-20 UNF spindle with a 1.5-13 mm keyless chuck, allowing rapid bit changes for drilling and screwdriving tasks without additional tools.Chuck capacity and spindle thread Makita lists sound pressure around 88 dB(A) and sound power around 99 dB(A), underlining that the tool generates typical power-tool noise levels and may warrant hearing protection in extended use.Sound pressure and sound power levels

Features for Trade and Serious DIY Use

Beyond basic specifications, the DHP484Z is equipped with features aimed at regular jobsite use, including twin LED job lights with an after-glow function to illuminate the work area after the trigger is released.Twin LED job lights and after-glow Extreme Protection Technology (XPT) enhances resistance to dust and moisture, helping the drill withstand tougher site conditions alongside its aluminium gear housing and all-metal gearbox.Dust and moisture protection and housing

Electric brake and forward/reverse rotation are standard, shortening stopping time after the trigger is released and supporting quick direction changes in screwdriving applications.Electric brake and rotation controls The ergonomic soft-grip handle, compact 182 mm body and balanced weight with an 18 V LXT battery are highlighted by reviewers for making the drill comfortable in tight spaces and overhead work.Compact design and ergonomics

The DHP484Z is usually supplied as a bare tool, without batteries or charger, sometimes bundled with a Makpac carry case, belt clip and bit depending on the retail configuration.Bare-tool supply and Makpac case The body-only format allows users who already own Makita 18V LXT batteries and chargers to add the drill to their kit without duplicating power packs.Body-only configuration and battery compatibility

How It Compares with Typical 18V Hammer Drills

With a maximum hard-joint tightening torque of 54 Nm, the DHP484Z sits in the mid-to-upper range of 18V combi drills widely used in construction and renovation, matching the torque of many compact trade-class hammer drills while remaining notably shorter at around 182 mm in overall length.Torque and length comparison Maximum impact rate of 30,000 impacts per minute in high gear aligns with category norms for 18V hammer drills designed for masonry drilling, supporting common tasks such as anchor holes in concrete and brick.Impact rate compared with typical 18V hammer drills

The compact length and body-only configuration make the DHP484Z especially attractive to users who prioritize maneuverability and integration into an existing Makita 18V LXT kit over absolute maximum torque figures.User commentary on compactness and kit integration In contrast, bulkier 18V and 36V hammer drills offering torque figures above 80 Nm tend to be longer, heavier and more specialized for heavy-duty concrete drilling, which can be less comfortable for all-day mixed-material tasks.

Makita's XPT dust and moisture protection places the DHP484Z among combi drills suited to outdoor and dusty environments, where basic DIY-class drills without such sealing can be more vulnerable to ingress.Durability and XPT protection context For many electricians, plumbers, carpenters and serious DIY users, the combination of 54 Nm torque, 2-speed brushless drive, 21 torque settings and compact handling in the DHP484Z balances performance and manageability in a way that covers most day-to-day drilling and fastening jobs without moving to heavier platforms.

Placement in Makita's Lineup and Best Use Cases

Makita U.S.A., Inc., headquartered at 14930 Northam Street in La Mirada, California, oversees sales and support for Makita cordless power tools in the United States, including 18V LXT hammer driver drills that mirror the DHP484Z's capabilities within the U.S. product numbering system.Makita U.S.A. corporate office listing The DHP484Z itself is widely documented in European, UK and Australian markets as part of Makita's mid-range 18V LXT combi drill family, positioned between lighter-duty home-use drills and heavier rotary hammer tools.

Within Makita's cordless drill lineup, the DHP484 series is often contrasted with more powerful 18V XGT or higher-output LXT models that trade compact dimensions for higher torque and impact energy, as well as with smaller drills aimed at light-duty tasks where weight and size take precedence over hammer capability.Positioning within Makita combi drills For users who regularly drill into a mix of wood, metal and occasional masonry, need 18V LXT battery compatibility and appreciate a body-only option to build out a cordless kit, the DHP484Z style of hammer driver drill is a practical fit, while those focusing on heavy structural concrete work may look to dedicated SDS-plus rotary hammers with higher impact energy.

Makita DHP484Z 18V LXT Hammer Driver Drill Facts

• Product: Makita DHP484Z 18V LXT Brushless Hammer Driver Drill (body only)
• Manufacturer: Makita U.S.A., Inc., La Mirada, CA, USA
• Category: Cordless hammer driver drill (18V LXT)
• Model designation: DHP484Z (18V LXT platform)
• Voltage: 18 V nominal battery voltage
• No-load speed: 0-500 rpm (low), 0-2,000 rpm (high)
• Max tightening torque: 54 Nm (hard), 30 Nm (soft)
• Impact rate: 0-7,500 ipm (low), 0-30,000 ipm (high)
• Max drilling diameters: 38 mm in wood, 13 mm in steel, masonry and concrete
• Chuck capacity: 1.5-13 mm keyless chuck
• Overall length: approximately 182 mm body length
• Weight: about 1.2 kg without battery, about 1.8 kg with battery
• Target audience: Professional trades and serious DIY users needing a compact 18V LXT hammer drill for mixed-material drilling and fastening