Anker MagGo Wireless Charging Station 3-in-1 Stand - 15W Qi2 Charger For Apple Devices
Published on 09/14/2026 at 17:05 | Editorial responsibility: Rafael Müller, Editor-in-Chief AD HOC NEWS
Anker MagGo Wireless Charging Station (3-in-1 Stand) puts iPhone, Apple Watch, and AirPods charging on a single compact base, turning a nightstand or desk into a dedicated spot for your Apple gear.
Design And Power Output For Apple Ecosystems
The Anker MagGo Wireless Charging Station (3-in-1 Stand), model number A25M3, is built around a vertical stand that holds an iPhone on a MagSafe-compatible pad, an Apple Watch on a raised arm, and true wireless earbuds or AirPods on the base charging area.Anker lists the stand configuration under the MagGo lineup.
Total rated power is 25W, with the phone pad delivering up to 15W, the Apple Watch charger up to 5W, and the base pad for true wireless earbuds up to 5W.These three outputs share one power input and are designed to run simultaneously.
Input power comes through a USB-C port rated at 12V?3A or 15V?2.66A, which allows the station to reach its combined 25W ceiling when paired with an appropriate wall adapter.The manufacturer data sheet calls out these input figures for the A25M3 platform.
Size, Weight, And Compatibility Details
The station’s footprint is roughly square at 3.46 × 3.46 inches, with a height of about 4.92 inches, so it occupies less space than larger cube-style 3-in-1 chargers while still leaving room to rest earbuds on the base.Closely related dock-style MagGo stations share similar dimensions around 3.46 × 3.46 × 4.88-4.92 inches.
Weight is listed at 10.05 oz / 285 g, light enough to move between rooms yet heavy enough that the stand stays put when attaching or removing a phone from the magnetic pad.Anker’s dock stand spec sheet gives this weight figure for the same A25M platform.
Compatibility focuses on Apple hardware: the MagSafe-style phone pad is specified for iPhone 16, 15, 14, 13, and 12 series handsets running iOS 17.4 or later, while the watch arm covers Apple Watch Series 1 through Series 10, SE, and both Apple Watch Ultra models.The compatibility list on Anker’s US page includes iPhone 12-17 and multiple Apple Watch generations.
The base pad supports AirPods Pro 1 and 2 plus AirPods 2, 3, and 4 with wireless charging cases, and is also specified for other true wireless earbuds that accept Qi wireless charging.Anker’s compatibility section explicitly calls out AirPods variants and TWS earbuds with wireless charging cases.
Charging Performance And Qi2 Certification
The MagGo 3-in-1 stand is based on Qi2 wireless charging with a 15W iPhone charging profile, which allows it to match the speed of official MagSafe chargers for supported iPhone models.Anker describes its Qi2-certified stations as delivering 15W fast wireless charging for iPhones.
Total system power at 25W means the stand can deliver full 15W to the phone while simultaneously powering an Apple Watch and earbuds at 5W each, assuming the bundled or recommended wall charger meets the 12V?3A or 15V?2.66A input requirements.The A25M3 technical sheet explicitly lists the 25W total wattage and 25W input envelope.
Certification notes on the spec sheet show the stand meeting MPP(Qi2) and MFW requirements, indicating it conforms to the latest Qi2 magnetic power profile and carries Made for Watch certification for Apple Watch charging.The certification line on Anker’s dock stand page lists MPP(Qi2) and MFW for the platform.
Price Positioning In The 3-in-1 Charger Segment
In the US, the MagGo Wireless Charging Station 3-in-1 Stand carries a list price of $99.99 for the full charger package, placing it below Anker’s more expensive cube-style 3-in-1 chargers while remaining above many basic two-device stands.$99.99 appears as the base US list price in a TechRadar review of the 3-in-1 stand.
The same review notes alternative list prices of $89.99 and AU$199.95 in other markets, underlining how the stand is positioned as a midrange 3-in-1 charger that undercuts Anker’s 3-in-1 Cube with MagSafe, which uses a more complex enclosure and tends to cost more at retail.The same testing article compares the 3-in-1 stand price against the higher-priced cube.
Verizon’s US catalog lists the Foldable 3-in-1 MagGo station with a 40W USB-C charger and cable in the box, giving a reference point for bundled wall adapter value when comparing desk-friendly stands to travel-friendly foldable pads.The Verizon listing details an included 40W USB-C charger and 5-foot USB-C cable for the foldable 3-in-1 version.
Comparison With Foldable 3-in-1 MagGo Chargers
Anker’s MagGo lineup includes both stand and foldable designs, and the Foldable 3-in-1 charger (often designated by model A2557 on refurbished listings) trades desk height and a fixed stand for a pocket-sized body that folds to roughly 3.50 × 2.36 × 0.98 inches.Anker’s refurbished page for the Foldable 3-in-1 charger lists the folded dimensions.
That foldable unit weighs about 6.9 oz / 195.6 g, significantly lighter than the 10.05 oz stand, and is marketed as a pocket-sized charger that can drop into a travel bag while still delivering a 15W phone pad and 5W watch and earbuds pads.A bundle listing for the Foldable 3-in-1 MagGo charger confirms the 6.9 oz weight and 3.50 × 2.36 × 0.98 in dimensions.
Both the stand and the foldable pad share the same 25W total wattage and 15W/5W/5W device outputs, but the stand focuses on upright viewing and a permanent desk footprint, while the foldable pad emphasizes travel size and packs down to a baseball-sized slab when folded.The Foldable Pad A25M8 spec sheet highlights the same 25W total wattage and 15W/5W/5W outputs as the stand.
Manufacturer And US Presence
Anker MagGo charging stations are produced by Anker Innovations Technology Co., Ltd., a Chinese electronics manufacturer headquartered in Changsha, Hunan, which operates global offices including a North American hub in Bellevue, Washington.A widely cited company overview describes Anker Innovations as a Chinese electronics manufacturer based in Changsha.
US-facing support and corporate contact information list Anker Innovations Ltd., 400 108th Ave NE, Suite 400, Bellevue, WA 98004 as the main US office, alongside a toll-free service number for the USA and Canada.One customer support profile shows the Bellevue office address and US toll-free contact for Anker.
The MagGo brand functions as Anker’s consumer-facing name for its MagSafe-compatible wireless charging accessories, and US product pages on Anker’s own domain host detailed specifications and compatibility tables for each MagGo station.An overview page on Anker’s site groups the Wireless Charging Station (3-in-1 Stand) alongside other MagGo Qi2 chargers.
Full Specs For Anker MagGo 3-in-1 Stand
Anker’s own product page for the MagGo Wireless Charging Station (3-in-1 Stand) provides detailed technical data, compatibility tables, and certification notes for Qi2 and Apple Watch charging.
Use Cases And Segment Positioning
Within the wireless charging segment, the MagGo 3-in-1 stand targets households and offices that rely heavily on Apple devices and want a single charging base instead of multiple cables across a desk or nightstand.
Compared with more travel-focused 3-in-1 pads that emphasize folding size and sub-7 oz weight, the stand’s 10.05 oz mass and roughly 3.46 × 3.46 × 4.92-inch structure favor a permanent spot where the phone can double as a small screen for notifications and video while charging.
For Apple users who already own MagSafe-compatible iPhones, modern Apple Watch models, and wireless charging AirPods, the station’s combination of 15W Qi2 phone charging, 5W watch support, and 5W earbuds power in one device offers a streamlined alternative to separate chargers while staying in the midrange price band around $99.99.
Key Facts At A Glance
- Product: Anker MagGo Wireless Charging Station (3-in-1 Stand), model A25M3
- Manufacturer: Anker Innovations Ltd., 400 108th Ave NE, Suite 400, Bellevue, WA 98004, USA
- Category: Wireless charging station (Qi2, 3-in-1)
- Total wattage: 25W combined output (15W phone, 5W Apple Watch, 5W earbuds)
- Dimensions: Approximately 3.46 × 3.46 × 4.92 in stand footprint
- Weight: Approximately 10.05 oz / 285 g
- Price: $99.99 list price in the US (as of 09/14/2026)
- Target audience: Apple users seeking one Qi2-certified charger for iPhone, Apple Watch, and AirPods on a desk or nightstand
