Flip HKD Complete Skateboard 7.75 - Maple Deck And ABEC-7 Bearings For Street Tricks
Published on 09/03/2026 at 07:23 | Editorial responsibility: Rafael Müller, Editor-in-Chief AD HOC NEWS
Flip HKD Complete Skateboard 7.75 is a ready-to-ride street deck built around a 7.75-inch Hard Rock Maple board that comes fully assembled with trucks, wheels, bearings and griptape for session-ready skateparks and city spots. The 7.75-inch HKD Team setup is documented with full specs and defines the model used in this article.
Deck Size, Shape And Core Specifications
At the heart of the setup is a deck that measures 7.75 inches in width and 31.6 inches in length, a format aimed at teens and adults who want a nimble street board without giving up stability. The 7.75 model is listed with a 19.7 cm deck width and 80.3 cm length, matching the classic popsicle silhouette many skaters learn on. The wheelbase is specified at 14.22 inches, which keeps the board responsive underfoot while still feeling predictable for ollies, kickflips and tight turns. The same listing notes a 36.1 cm wheelbase, medium concave and a double kicktail shape, all of which support modern technical street skating.
The deck itself is made from Hard Rock Maple, a dense wood commonly used on quality skateboards for its pop and durability. The specification sheet states Hard Rock Maple construction with medium concave and a double kicktail, indicating a standard seven-ply build designed to withstand repeated landings. A maximum rider weight of 220 lb is provided, a practical ceiling for safety and performance for heavier skaters who still want a street-ready board. The 7.75-inch complete is rated to carry up to 220 lbs, which places it comfortably within the usual range for adult skateboards with similar construction.
Trucks, Wheels And Bearings Package
Flip HKD Complete Skateboard 7.75 comes pre-assembled with trucks, wheels and bearings tuned to street and park use, removing the need to mix and match hardware. The listing describes standard kingpin trucks with standard hangers, paired with 52 mm wheels made from cast polyurethane. Wheel hardness is specified at 99A, a scale that points to firm wheels that roll efficiently on smooth concrete and offer crisp feedback on ledges and rails. The 7.75 package lists 52 mm wheels at 99A hardness, a familiar combination for skatepark and street riders.
For the 7.75-inch model, the hanger width is reported at 5 inches, which aligns well with the deck width and reduces overhang that can catch on obstacles. The specification table lists a 129 mm hanger for the 7.75 deck, matching closely to the edge of the board. Bearings are described as ABEC-7, a higher precision rating than the ABEC-3 bearings used on the narrower 7.5-inch version. The same table notes ABEC-7 bearings on the 7.75 and 8.0-inch boards, which should provide smoother roll and better speed retention than entry-level bearings.
Griptape arrives already applied, so the board can be ridden straight out of the box. The specification section notes that the deck is pre-gripped, meaning riders do not need to trim and apply grip themselves. That detail, combined with factory-mounted trucks, wheels and hardware, confirms that the HKD 7.75 is sold as a full complete rather than a deck-only option, aimed at skaters who want a convenient setup for street and park without custom assembly.
Graphic Design And Brand Context
The HKD line carries the Flip HKD logo graphic, which appears as a classic brand mark on the deck stain. The product description refers to classic logo decks with single color stains and the Flip logo, indicating a straightforward aesthetic rather than elaborate illustration. That puts focus on the geometry and hardware rather than on limited-edition artwork, reflecting the HKD series positioning as everyday skate tools.
Flip Skateboards is a United States-based international skateboard company with roots in early 1990s skate culture. Publicly available background material describes Flip Skateboards as a U.S.-based firm co-owned by Jeremy Fox and Ian Deacon. A separate profile lists FLIP SKATEBOARDS, INC. with a headquarters address in Laguna Niguel, California, confirming a U.S. corporate base for the brand. The corporate listing places Flip Skateboards in Southern California with PO BOX 6608 in Laguna Niguel, CA 92607. This context matters for U.S. riders who prefer to ride boards conceived within the same skate scene they frequent.
Pricing And Value Positioning
In the U.S. market, Flip HKD Complete Skateboard 7.75 sits in the mid-priced segment for branded complete setups. One U.S.-focused retailer lists the HKD complete at $126.95, positioning it above some entry-level completes but below the cost of piecing together high-end components individually. The price shown for the complete package is $126.95. A separate product description for a Flip HKD complete in 7.75-inch width indicates a price of $99.95 in another channel, which suggests some spread depending on retailer and configuration. The 7.75 red HKD complete is listed with an MSRP of $99.95. For U.S. shoppers, that puts the HKD 7.75 within the expected band for branded street completes and leaves room for upgraded parts later.
Unit pricing for hardware is less commonly broken out on skate decks than on consumable goods, but comparing HKD 7.75 against neighboring models gives a sense of how it fits the category. The same HKD line offers a 7.5-inch board with ABEC-3 bearings and slightly softer 90A wheels at the smaller size, whereas the 7.75-inch model upgrades to ABEC-7 bearings and 99A wheels. The model table shows the 7.5 deck with 90A wheels and ABEC-3 bearings, while the 7.75 and 8.0 models share 99A wheels and ABEC-7 bearings. That suggests the 7.75 is positioned as a more performance-oriented option within the HKD family, particularly suited to riders who are ready to benefit from better bearings and firmer wheels without stepping up to a wider deck.
Flip HKD Team Complete On Flip Skateboards
Flip Skateboards presents HKD Team completes, including the 7.75-inch width, as part of its current lineup of Hard Rock Maple street boards.
Fit For Skaters And Recommended Use
With its 7.75-inch deck width and medium concave, Flip HKD Complete Skateboard 7.75 is best suited to skaters whose height and shoe size line up with common street sizing guides for this width. Retail guidance often recommends widths in the 7.75 to 8.25-inch range for teens and adults who stand between roughly 140 and 175 cm tall, as this zone balances flip trick agility with enough deck underfoot. One sizing chart notes 7.75 to 8.25-inch boards for riders between 140 and 175 cm and EU shoe sizes 36 to 43. That places the HKD 7.75 near the lower end of standard adult widths, a good match for skaters who prioritize technical flip tricks, shorter spins and controlled rotations.
Because the setup uses 52 mm wheels at 99A hardness, it is naturally more at home on smooth concrete skateparks, steel-edged ledges and regular sidewalks than on very rough asphalt or crusty street spots. The wheel description specifies cast PU wheels with a 52 mm diameter and hard durometer, which tend to transmit surface texture clearly to the rider. That feedback can help with precise tricks but may require a smoother surface for longer-distance cruising. The ABEC-7 bearings give the board enough roll speed to keep lines flowing through a park or through a series of urban features without feeling sluggish on repeated pushes.
Comparison With Other HKD Sizes And Street Standards
Comparing Flip HKD Complete Skateboard 7.75 against other HKD models clarifies the trade-offs for riders choosing width and hardware. The HKD Team range includes 7.5-inch, 7.75-inch and 8-inch decks, each with slightly different specifications. The model specification table lists a 7.5-inch deck with 90A wheels and ABEC-3 bearings, a 7.75 deck with 99A wheels and ABEC-7 bearings, and an 8.0 deck also with 99A wheels and ABEC-7 bearings. Skaters moving up from the 7.5-inch size gain both width and hardware quality when they choose the 7.75, bringing the board closer to the street standard of 8 inches while still keeping flip tricks quick.
Against the broader street category, 7.75-inch decks are often considered a transitional width between smaller youth boards and the full 8.0-inch adult standard. Many complete setups for park and street lean toward 8.0 to 8.25 inches, especially for riders who focus on transition skating and bowl riding. In this context, HKD 7.75 prioritizes technical street tricks and lighter feel. With a 14.22-inch wheelbase, the board is marginally more agile than some wider 8.25-inch boards that use longer wheelbases around 14.25 to 14.5 inches, which tend to feel more stable at speed but slower to pivot. That makes HKD 7.75 an appealing choice for intermediate skaters who have moved beyond beginner hardware but still want a board that flicks and spins quickly.
Context And Verdict
Flip HKD Complete Skateboard 7.75 slots into the current U.S. skateboard scene as a mid-priced, Hard Rock Maple complete that favors technical street and park riding over cruising or transition-heavy sessions. With a deck width of 7.75 inches, length of 31.6 inches, 14.22-inch wheelbase, 52 mm 99A wheels and ABEC-7 bearings, it delivers a configuration that supports flip tricks and consistent lines for riders in the standard adult size range. The central specification sheet ties together the deck dimensions, wheelbase, wheel size, hardness and bearing precision. Compared with both narrower HKD sizes and wider street boards, the 7.75-inch complete lands in a sweet spot for skaters who want a responsive deck and upgraded bearings without committing to a full 8.0-inch platform.
Flip HKD Complete Skateboard 7.75 At A Glance
- Product: Flip HKD Complete Skateboard 7.75
- Manufacturer: FLIP SKATEBOARDS, INC., Laguna Niguel, CA, USA
- Category: Street skateboard complete
- Deck dimensions: 7.75 in width, 31.6 in length, 14.22 in wheelbase
- Deck material: Hard Rock Maple with medium concave and double kicktail
- Hardware: 52 mm 99A PU wheels, ABEC-7 bearings, standard kingpin trucks with 5 in hanger width
- Price: $126.95 for the complete package (as of 09/03/2026)
- Target audience: Intermediate street and park skaters in the 7.75 in deck width range
