Europe's Robot Safety Rules Get Their Biggest Overhaul Since 2011 — and the Clock Is Ticking Toward 2027
Published on 11/21/2026 at 18:01 | Editorial boerse-global.deProgramming, setup and maintenance — not the daily production grind — are where most robot accidents actually happen, according to statistical surveys. That finding sits at the heart of a sweeping revision of the standards governing how machines and people share a workplace, and it explains why the new rulebooks place heavy emphasis on safeguarding those non-routine tasks through control-system engineering.
The technical articles detailing these requirements centre on the relevant ISO standards for human-robot shared workspaces, aimed at heading off impermissible risks during operation. At their core are revised bodies of rules that sharpen the technical specifications for collaborative industrial applications.
ISO 10218:2025 Rewrites the Rulebook
The first full revision of the standard since 2011 draws a fundamental distinction between two levels. ISO 10218-1 covers the robot as an incomplete machine; ISO 10218-2 covers complete systems and cells.
A compliant robot on its own therefore does not add up to a compliant overall system. The new edition drops the earlier collaborative operating modes, with safety assessment now carried out on an application-specific basis rather than a purely robot-specific one.
Functional safety is also tied directly to cybersecurity considerations for the first time. Full conformity under the revised ISO 10218-1 and 10218-2 parts demands risk assessments, stricter verification of protective functions, protocols for human-robot collaboration and compliance with IEC 61508 SIL 3.
For collaborative operation, ISO 10218:2025 sets out three specific risk-reduction measures, at least one of which must be implemented. A visual indicator signalling collaborative status is also mandatory. One of the measures covers hand guiding with safety-monitored limited speed, a local emergency stop and a three-position enabling switch.
Another provides for speed and distance monitoring, requiring defined distances, specified speeds and a risk assessment including approach speeds under EN ISO 13855.
All told, human-robot collaboration rests on four safety-relevant aspects: stop-state monitoring, speed and distance monitoring, hand guiding, and force and power limiting. New functions include a manual high-level run (T2), a single control point, start and restart interlocks, and a normal-stop function.
Sizing Up Protective Zones — and the Legal Countdown
UNE-EN ISO 13855:2025 governs how protective devices are positioned to keep the human body from approaching hazard points within the intended control area. It determines the location and dimensions of detection zones for electro-sensitive protective equipment, pressure-sensitive mats and floors, the arrangement of two-hand and single-control devices, and interlocking guards.
The provisions also apply when protective devices are dimensioned and access to safety-related control equipment from inside the safeguarded space is being assessed.
In practice, robots with contact detection do not make physical barriers redundant in shared zones. Fence systems remain a complement to sensor-based solutions such as light curtains. "Cobot," notably, is not an official standards term.
On the legal side, the European Machinery Regulation, applicable from January 2027, is gaining importance. According to manufacturer KUKA, existing industrial installations face no blanket requirement to be renewed as long as systems remain unchanged, maintained and safely operated. A fresh risk assessment becomes mandatory only when substantial modifications are made.
Safety Built Into the Controller
Integrated safety controllers are one answer to the non-routine-task problem. Fanuc's Dual Check Safety Position & Speed Check function in the R30iA and R30iB controllers, for instance, is certified to Performance Level d under BS EN ISO 13849-1. The Safe IO Connect interface reaches Performance Level e, backed by an optional safety PMC.
According to Fanuc UK, such software-based safety functions — and the resulting absence of extra hardware — can save up to 50 percent of costs on a small single-robot system with multiple protective devices, since external sensor hardware can run to several thousand pounds depending on the application. Up to eight vertical lines can be configured per safety zone.
